Version 3.0

We will verify Kirchhoff’s Voltage Law (KCL) & Kirchhoff’s Current Law (KCL) in series and parallel combination of LEDs and resistors.

This content is for First Step, Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

In this project, we will verify Ohm’s law in a circuit by using different value resistors and also measure & verify current using a multimeter.

This content is for First Step, Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

You build a temperature-controlled switch using a voltage-divider circuit and a preset and a thermistor. It’s a fun project for classrooms.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

Build transmitter & receiver circuits using an IR LED & a photo-diode; alarm gets triggered on detection of intrusion & beeps continuously.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

Boost the energy of a 1.2 volt cell up to 2 volt to glow an LED in a series RLC circuit; a perfect project based on inductors (coil).

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

Build & realize a bridge rectifier using diodes, a 12-0-12 V AC step-down transformer & a load resistor; measure the rectified output.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

Build & realize a bridge rectifier using diodes, a 12 V AC step-down transformer & a load resistor; measure the rectified output.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

You will verify the Wheatstone Bridge principle and experimentally calculate the value of an unknown resistor using a potentiometer.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

This project will test the factors affecting the speed (RPM) of the DC motor. Is it the voltage or current? A must-have for robotics clubs.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

A motor-driving circuit used in Robotics to control the direction of a DC motor using transistors; a must-have for maker clubs.

This content is for Grand Master (Monthly), Grand Master (Yearly), Grand Master + KIT-1 (Yearly), Gift 1 Month of Academy Membership , and Mand Labs Academy Desktop Application members only.
Log In Register

Proudly made in Phoenix AZ 

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram